Suco 050X Series Electronic Switches

E.2 Electronic Pressure Switches, Performance Series, hex 24, adjustable by user image

ANZ Controls would like to introduce you to the the new SUCO 0500 and 0501 electronic switch series. Samples are available for your evaluation, we can programme these specifically to your requirements. These compact electronic switches are made with a 303 Stainless Steel body with ceramic sensor in thick film technology. They can be set anywhere in the pressure range and their hysteresis (dead band) can also be set anywhere between 1 and 98 % of the pressure range. The most amazing feature of these new pressure switches is the “Window Hysteresis” mode. An example of “Window Hysteresis” is if the Normally Open switch points are set to to 2 bar at the low set point and 5 bar at the high set point the the switch will open below 2 bar then close until it reaches 5 bar and then open again for pressures above 5 bar. These switches also come with an impressive accuracy of +/- 0.5 % FS of the adjustment range so a 0-100 bar switch has an accuracy of 0.5 bar.

Switching point: 0 – 100 bar
Overpressure protection up to 2 x
Transistor outputs: Qty: 1, maximum output current 0.5 A
Variant: PNP
Housing materials: Stainless steel 1.4305 (AISI 303)
Sealing materials: NBR, FKM
Thread: G1/4, NPT1/4
Types: 0500, 0501, 0502, 0503
Data sheet for 0500-0511